“Being sold as a roller so you must arrange pick up from Phoenix AZ area. Car was running and driving, motor was pulled simply to install a blown LS3. Family issues arose causing a hault mid project. Blower motor was sold but original LS1 with harness, PCM, 6 Speed, etc... come with the car (just not installed). EVERYTHING else comes with the car installed (full suspesnion, brakes, etc...)Basically all you need to do is put the motor and tranny back in and you WILL need some miscellaneous items (ignition coils an A/C if you want to put back on).”
Yes, you read correctly, this is THE McNord WIDE BODY car actually FOR SALE!!!! Do Google search for "McNord" and you'll see plenty of pictures and postings (he designed the car and also makes the gauge overlays you find in most 1993-2002 Camaros/Firebirds)!!!
We've been asked to duplicate the body kit COUNTLESS times over the years but don't because he wanted to be the only one on the road (especially after all the work he put into it). It's won Super Chevy shows, been featured in magazines, had online articles written about it etc...
It's set up for daily driving and auto cross (full suspension, brakes, body, etc...) and WAS going to be getting blown LS3 put in it BUT during the motor swap he had family emergency. THIS CAR COMES AS ROLLER simply because the stock motor and transmission are currently out of the car and he doesn't have the time to put it back in right now.
You will need few miscellaneous items to get it running (ignition coils and A/C compressor mainly as they went with the other motor) but you'll see the list of parts it comes with I'm sure you'll have no problem only having to buy some coils lol!
Still attached to the car:
Front suspension: Road racing member Adjustable lower control arms Tubular upper control arms Koni single adjustable shocks Hotchkis springs UMI sway bar 14" slotted vented rotors Brembo calipers CCW 18"x 10" wheels with 295 road racing compound tires
Rear suspension: UMI Rear Sway Bar Tubular control arms Adjustable panhard bar Koni single adjustable shocks Hotchkis springs CCW 18"x 12" wheels with 315 road racing compound tires
Miscellaneous: Walbro 255 fuel pump Wolf 6pt cage Bride racing seats RCI 5pt harnesses Trans am door panels Autometer Tach McNord overlay Buckart tubular front bumper
Body: McNord front and rear bumpers Splitter with rods Sunoco hood Wide quarters and fenders Custom spoiler and rockers Eclipse fuel door
Parts that come NOT attached...
Complete LS1 Motor Complete T56 Speed Weld in sub frame connectors UMI adjustable torque arm Drive shaft loop Aluminum drive shaft Pacesetter headers 3" TSP true duals with pipe Stock size slotted and vented rotors Racing Power Steering Pump and Gearbox
Again, being sold as roller so you must arrange pick up from Phoenix AZ area. Car was running and driving, motor was pulled simply to install blown LS3. Family issues arose causing hault mid project. Blower motor was sold but original LS1 with harness, PCM, Speed, etc... come with the car (just not installed). EVERYTHING else comes with the car installed (full suspension, brakes, etc...)
Basically all you need to do is put the motor and tranny back in and you WILL need some miscellaneous items (ignition coils an A/C if you want to put back on). The wheels and tires were about $6k, the body work $10k, etc... someone is getting helluva deal as this car has to be SOLD and it's getting listed at NO RESERVE!!!
Thanks for looking!
Also published at eBay.com:
Other Chevrolet cars offered via internet auctions: