Van started off as 2wd 4.6L gasser. In February began converting it to diesel and 4wd. It's down to few things left to finish it but I've recently taken job with the power company so I'm closing my company and no longer have any use for it. Motor, transmission, axles, fuel tank driver power seat and passenger seat are all from 99 F-350. IDM, PCM and engine harness are from 99 E-350. Dash harness and engine bay harness are from 98 E-450 which is not compatible. The van will need the dash and engine bay harness re-pinned or replaced with the correct year harness (99). Alsi needs harness made or original modified for the transfer case. The radiator is cracked and will need to be replaced, it was damaged during shipping and didn't know until months down the road when tried starting it. A/C will need to be charged with freon. never finished bleeding the brakes either. Front drive shaft from the F-350 is not long enough so new will have to be made. Motor ran perfectly when removed from the truck and has 199,000 miles on it. I'm located 10 miles SE of New Orleans for anyone interested in looking at it.